Supported Objects - Siemens SINAMICS G120 Original Instructions Manual

Configuring the fieldbus
7.5 Communication via EtherNet/IP
7.5.5

Supported objects

EtherNet/IP objects supported by the G120
Object class
hex
1 hex
4 hex
6 hex
28 hex
29 hex
2A hex
32C hex
32D hex
90 hex
91 hex
F5 hex
F6 hex
401 hex ... 43E hex 1025 ... 1086 Parameter object
1) these objects are part of the EtherNet/IP system management.
ODVA AC/DC assembly
Number required/
optional
hex dec
14 hex 20 Required
15 hex 21 Optional
16 hex 22 Optional
17 hex 23 Optional
18 hex 24 Optional
19 hex 25 Optional
46 hex 70 Required
47 hex 71 Optional
48 hex 72 Optional
49 hex 73 Optional
4A hex 74 Optional
4B hex 75 Optional
140
Object name
dec
1 Identity object
4 Assembly object
6 Connection Manager object
30 Motor Data Object
31 Supervisor Object
42 Drive Object
44 Siemens Drive Object
45 Siemens Motor Data Object
144 Parameter object
145 Parameter object free access (DS47)
245 TCP/IP Interface object
246 Ethernet Link object 1)
Type Name
Sending Basic Speed Control Output
Sending Extended Speed Control Output
Sending Speed and Torque Control Output
Sending Extended Speed and Torque Control Output
Sending Process Control Output
Sending Extended Process Control Output
Receiving Basic Speed Control Input
Receiving Extended Speed Control Input
Receiving Speed and Torque Control Input
Receiving Extended Speed and Torque Control Input
Receiving Process Control Input
Receiving Extended Process Control Input
Objects
required
x
x
x
x
1)
x
Operating Instructions, 11/2013, FW V4.6.6, A5E02430659B AG
ODVA objects SINAMICS
objects
x
x
x
x
x
x
x
x
Inverter with CU230P-2 Control Units