Mazda CX-7 2007 Workshop Manual page 1390

SUPPLIER IDENTIFICATION PROCEDURE[AUDIO]
Note
• The supplier can vary with the module. When asking the supplier (service center) for repair or
replacement, identify the supplier and fill in the Audio Repair Order Form with the following procedures.
Identification Using the Label or Inscribed Lettering
1. Remove the audio unit.
2. Verify the supplier by referring to the label attached to each unit.
Identification Using the On-board Diagnostic Test Mode.
1. Start the on-board diagnostic test mode.
2. Identify the device and supplier codes by referring
to the information display.
Note
• If no DTC is stored, no codes will be
displayed.
Supplier code
1 SANYO Automedia
2 Panasonic
3 Clarion
4 Pioneer
Part
number
00 Cassette deck
03 CD player
05 CD changer (external)
06 CD changer
09 Base unit
10 MP3 applicable CD player system
16 CAN system
17 CAN system
21 Audio cover
22 MP3 applicable CD changer
End Of Sie
MEMORY CLEARING PROCEDURE[AUDIO]
1. Start the on-board diagnostic test mode.
2. While pressing the POWER button,
simultaneously press the AUDIO CONT button for
2 s or more.
Caution
• Before clearing the memory, be sure to
enter all of the DTCs displayed in the on-
board diagnostic test mode in the Audio
Repair Order Form.
3. To stop the on-board diagnostic test mode, turn
the ignition switch off.
End Of Sie
09-02G–2
ON-BOARD DIAGNOSTIC [AUDIO]
Supplier name
Part name
SUPPLIER CODE
PART NUMBER
POWER BUTTON
id0902f6803800
acxuuw00001843
id0902f6803900
AUDIO CONT BUTTON
acxuuw00001845