Configuring a monthly policy monitor schedule
To configure a monthly schedule, complete the following steps.
1. Select Monthly from the Frequency list.
2. Select the time of day you want deployment to run from the Time (hh:mm) lists.
3. Select the day you want deployment to run from the Day of the Month list (1 through 31).
4. Click OK on the Schedule Properties dialog box.
Brocade Network Advisor SAN User Manual
53-1002167-01
Where the hour value is from 0 through 12, the minute value is from 00 through 59, and the
day or night value is AM or PM.
To finish configuring the policy monitor, return to one of the following procedures:
•
To add policy monitor, refer to
•
To edit policy monitor, refer to
Policy monitor scheduling
step 7
of
"Adding a policy monitor"
step 7
of
"Editing a policy monitor"
29
on page 828.
on page 833.
841