Virtual Fabrics Considerations; Creating An Scc, Dcc, Or Fcs Policy; Editing An Scc, Dcc, Or Fcs Policy - Brocade Communications Systems StoreFabric SN6500B Administrator's Manual

15
Access control list policy configuration

Virtual Fabrics considerations

ACL policies can be implemented at the logical switch/logical fabric level.

Creating an SCC, DCC, or FCS policy

You can create the FCS policy only once.
To create an SCC, DCC, or FCS policy, perform the following steps.
1. Open the Switch Administration window as described in
2. Select the Security Policies tab.
3. Select the ACL subtab.
4. Select a policy by clicking on the appropriate tab (SCC, DCC, or FCS).
5. Click Edit.
6. Select the policy type you want to edit.
7.
8. SCC Option: Add switches to an SCC policy by selecting one or more switches and clicking Add
9. SCC Option: To add an offline switch, click Add other Switch and enter the WWN.
10. DCC Option: Select the ports to add to a DCC policy.
11. Click OK to confirm the changes to the switch.
12. Activate the policy in order to implement it. Refer to

Editing an SCC, DCC, or FCS policy

To edit an SCC, DCC, or FCS policy, perform the following steps.
1. Open the Switch Administration window as described in
2. Make sure the Show Advanced Mode option is selected.
3. Select the Security Policies tab.
4. Select a policy by clicking on the appropriate tab.
5. Click Edit.
6. Select the policy type you want to edit.
7.
174
window" on page 31.
This launches the ACL Policy Configuration wizard.
Click Next and click Create.
or Add All.
When you launch the DCC Policy Configuration wizard, only the launched switch and its ports
are listed in the tree. All the devices in the fabric are also listed in the tree.
on page 175 for instructions.
window" on page 31.
This launches the ACL Policy Configuration wizard.
Click Next and click Modify.
"Opening the Switch Administration
"Activating all SCC, DCC, or FCS policies"
"Opening the Switch Administration
Web Tools Administrator's Guide
53-1002756-01