Example
DXS-3600-32S#debug vrrp packets
DXS-3600-32S#
Received an ADV msg at VR 2 on interface vlan1
Received an ADV msg at VR 2 on interface vlan1
Received an ADV msg at VR 2 on interface vlan1
Send out an ADV msg at VR 1 at interface vlan1 priority 255
Send out an ADV msg at VR 1 at interface vlan1 priority 255
Send out an ADV msg at VR 1 at interface vlan1 priority 255
69-12 debug vrrp state
This command is used to turn on the VRRP state debug switch. Use the no form of the command to turn off the VRRP
state debug switch.
debug vrrp state
no debug vrrp state
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#debug vrrp state
DXS-3600-32S#
VR 1 at interface vlan1 switch to Master
VR 2 at interface vlan1 switch to Master
VR 1 at interface vlan2 switch to Init
69-13 debug vrrp log
This command is used to turn on the log of VRRP. Use the no form of the command to turn off the log of VRRP.
debug vrrp log
no debug vrrp log
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#debug vrrp log
DXS-3600-32S#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows how to turn on the VRRP packet debug switch.
None.
By default, the VRRP state debug switch is turned off.
Privileged EXEC Mode.
Level: 8
Use this command to turn on or turn off the VRRP state debug switch.
This example shows how to turn on the VRRP state debug switch.
None.
By default, the log of VRRP is turned off.
Privileged EXEC Mode.
Level: 8. (EI Mode Only Command)
Use this command to turn on or turn off the log of VRRP. When the log of VRRP is
turned on and there are some VRRP change events, some logs will be recorded.
This example shows how to turn on the log of VRRP.
640