D-Link DXS-3600-16S Manual page 173

Dxs-3600 series layer 2/3 managed 10gbe switch
Hide thumbs Also See for DXS-3600-16S:
Table of Contents

Advertisement

Example
DXS-3600-32S#debug ip bgp show neighbors
BGP neighbor: 10.10.10.2 (Internal Peer)
-----------------------------------------------
Session State
Session Activity
Peer Group
Remote AS
Local AS
Remote Router ID
BGP State
Hold Time (Configured)
Hold Time(Current Used)
Keepalive Interval (Configured)
Keepalive Interval(Current Used)
Advertisement Interval(Configured)
Advertisement Interval(Current Used)
AS Origination Interval (Configured)
AS Origination Interval (Current Used): 15 Seconds
Connect Retry Interval (Configured)
Connect Retry Interval (Current Used) : 0 Seconds
EBGP Multihop : 255
Weight
Next Hop Self
Remove Private AS
Allowas In
Address Family IPv4 Unicast
IPv4 Unicast
Soft Reconfiguration Inbound
Community Sent to this Neighbor
Default Originate
Incoming Update Prefix List
Incoming Update Filter List
Route Map for Outgoing Routes
Unsuppress Route Map
Outbound Route Filter (ORF) type (64) Prefix list:
Send Mode
: Enabled
Receive Mode
: Disabled
IP Route Prefix List orf_prelist1
seq 5 permit 30.0.0.0/8
Pass Word
Prefix Count
Send Prefix Count
Prefix Max Count
Prefix warning threshold
Prefix Max Warning
DXS-3600-32S#
7-102 debug ip bgp show peer-group
This command is used to show internal detailed information about the BGP peer group.
debug ip bgp show peer-group [{vrf VRF-NAME | vpnv4}]
Parameters
vrf VRF-NAME
vpnv4
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows how to display internal detailed information about BGP
neighbors.
: Enabled
: Enabled
: NULL
: 1
: 10
: 192.168.252.252
: Established ( UP for 00:24:25)
: 180 Seconds
: 180 Seconds
: 60 Seconds
: 60 Seconds
: 5 Seconds
: 5 Seconds
: 0 Seconds
: 0 Seconds
: 100
: Disabled
: Disabled
: Disabled
: Advertised and Received
: Enabled
: Both Standard and Extended
: Enabled
: prelist1
: ASlist1
: routemap1
: us_routmp1
: 1 entries
: (null)
: 1560
: 860
: 12000
: 75
: Disabled
(Optional) Specifies the VRF name. The length of the VRF-NAME is 12 characters.
Displays the peer group parameters in the address family of VPNv4
165

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents