D-Link DXS-3600-16S Manual page 383

Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#mpls qos policy policy1
DXS-3600-32S(config-mpls-qos)#class-map inbound exp 0 priority 0
DXS-3600-32S(config-mpls-qos)#class-map inbound exp 1 priority 1
DXS-3600-32S(config-mpls-qos)#class-map inbound exp 2 priority 2
DXS-3600-32S(config-mpls-qos)#class-map inbound exp 3 priority 3
DXS-3600-32S(config-mpls-qos)#class-map inbound exp 4 priority 4
DXS-3600-32S(config-mpls-qos)#class-map inbound exp 5 priority 5
DXS-3600-32S(config-mpls-qos)#class-map inbound exp 6-7 priority 6
DXS-3600-32S(config-mpls-qos)#class-map outbound priority 1 exp 6
DXS-3600-32S(config-mpls-qos)#class-map outbound exp 3
DXS-3600-32S(config-mpls-qos)#
38-47 match
This command is used to apply the policy to FECs. Use the no match command to remove the setting.
match {ip NETWORK-PREFIX/PREFIX-LENGTH}
no match [ip NETWORK-PREFIX/PREFIX-LENGTH]
Parameters
ip NETWORK-PREFIX/
PREFIX-LENGTH
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#mpls qos policy policy1
DXS-3600-32S(config-mpls-qos)#match ip 172.18.1.0/24
DXS-3600-32S(config-mpls-qos)#
38-48 show mpls qos
This command is used to display MPLS QoS settings.
show mpls qos [{policy [<NAME>] | ip NETWORK-PREFIX/PREFIX-LENGTH}]
Parameters
policy NAME
ip NETWORK-PREFIX/
PREFIX-LENGTH
Default
Command Mode
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows how to set the class-map for MPLS QoS policy 1.
Specifies the IP prefix FEC. If not specified, the no form of this command will remove
all binding FECs for the policy.
None.
MPLS QoS Configuration Mode.
Level: 15.
Use the match command to apply a MPLS QoS policy to FECs. The QoS policy will
be applied to all MPLS packets of the FEC. A FEC only can be bound to one policy.
This example shows how to apply MPLS QoS policy 1 to FEC 172.18.1.0/24.
Specifies the MPLS QoS policy name.
Specifies the IP prefix FEC whose QoS policy will be displayed
If no parameters are specified, all policy settings will be displayed.
None.
EXEC Mode.
375