D-Link DXS-3600-16S Manual page 223

14-17 next-server
This command is used to define the startup server that the DHCP client accesses during startup in the DHCP address
configuration mode. The no form of this command can be used to delete the definition of the startup server list.
next-server ip-address
no next-server
Parameters
ip-address
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#ip dhcp pool pool1
DXS-3600-32S(dhcp-config)#next-server 192.168.12.4
DXS-3600-32S(dhcp-config)#
14-18 service dhcp
This command is used to enable the DHCP service (include DHCP server and DHCP relay) on the device in the global
configuration mode. The no form of this command can be used to disable the DHCP service.
service dhcp
no service dhcp
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#service dhcp
DXS-3600-32S(config)#
14-19 show ip dhcp excluded-address
This command is used to display the groups of IP addresses which are excluded from the legal assigned IP address.
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Specifies to define the IP address of the startup server, which is usually the TFTP
server. It is required to configure one IP address at least.
None.
DHCP Address Pool Configuration Mode.
Level: 8
Define the next server for the DHCP client.
This example shows how to specify the startup server 192.168.12.4 for the DHCP
client.
None.
By default, this option is disabled.
Global Configuration Mode.
Level: 8
The DHCP server can assign the IP addresses to the clients automatically, and
provide them with the network configuration information such as DNS server and
default gateway. The DHCP relay can forward the DHCP requests to other servers,
and the returned DHCP responses to the DHCP client, serving as the relay for
DHCP packets.
This example shows how to enable the DHCP server and the DHCP relay feature.
215