D-Link DXS-3600-16S Manual page 453

Example
DXS-3600-32S#show ip route-preference ospf
Route Preference Settings
Protocol Preference
---------- ----------
OSPF Intra 80
OSPF Inter 90
OSPF ExtT1 110
OSPF ExtT2 115
DXS-3600-32S#
Example
DXS-3600-32S#show ip route-preference rip
Route Preference Settings
Protocol Preference
---------- ----------
RIP 100
DXS-3600-32S#
Display Parameters
Protocol
Preference
OSPF Intra
OSPF Inter
OSPF ExtT1
OSPF ExtT2
Example
DXS-3600-32S#show ip route-preference vrf VPN1
Route Preference Settings of VRF: VPN-A
Protocol Preference
---------- ----------
RIP 100
Static 60
Default 1
Connected 0
OSPF Intra 80
OSPF Inter 90
OSPF ExtT1 110
OSPF ExtT2 115
EBGP 70
IBGP 130
DXS-3600-32S#
46-8 show ip ecmp load-balance
This command is used to show the load-balancing algorithm settings.
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows how to check the route preference of OSPF route.
This example shows how to check the route preference of RIP route.
Description
The route type.
Route Preference.
OSPF intra-area route type.
OSPF inter-area route type.
OSPF AS external type-1 route.
OSPF AS external type-2 route.
This example shows how to check the route preference of all route types of VRF
VPN-A.
445