D-Link DXS-3600-16S Manual page 206

12-14 debug show module_version
This command is used to show the module version of the modules.
debug show module_version [module <MODULE_LIST>]
Parameters
module
MODULE_LIST
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#debug show module_version
FS: 1.00.0010
CNT: 1.00.0003
MIRROR: 1.00.0001
VLAN: 1.00
GVRP: 1.00
QINQ: 1.00
PROTOCOL_VLAN: 1.00
IP_SUBNET_VLAN: 1.00
MAC_BASED_VLAN: 1.00
LLDP: 1.00.0005
IGMP_Snooping: 1.00.0001
DOT1X: 2.00.0001
PORTSEC: 2.00.0001
MBAC: 1.13.0001
DHCP_CLIENT: 1.00.0001
DHCP_RELAY: 1.00.0001
DHCP_SERVER: 1.00.0001
STORM_CTRL: 1.02.0001
TRAFFIC_SEG: 1.00.0001
CONFIG: 1.00.0008
CPU_MONITOR: 1.00.0003
SNTP: 1.00.0001
TACACS: 1.00.0001
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Specifies the module which version will be displayed.
Specifies the module list.
None.
EXEC Mode.
Level: 15
The command can show the module version of the modules.
This example shows how to show the module version.
198