D-Link DXS-3600-16S Manual page 424

40-48 debug ip ospf show summary-list
This command is used to display the current internal OSPF summary list.
debug ip ospf show summary-list
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#debug ip ospf show summary-list
OSPF Summary List:
Area 0.0.0.0:
Circuit: 1.1.1.1
Neighbor: 90.2.0.1
LSID: 1.1.1.1 RTID: 1.1.1.1
Circuit: 2.2.2.1
Circuit: 10.1.1.6
DXS-3600-32S#
40-49 debug ip ospf log
This command is used to turn on the OSPF debug log function. Use the no form of this command to turn off the OSPF
debug log function.
debug ip ospf log
no debug ip ospf log
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#debug ip ospf log
DXS-3600-32S#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
None.
None.
Privileged EXEC Mode.
Level: 15. (EI Mode Only Command)
Use this command to check the LSA information on summary-list which is used to
exchange with neighbors.
This example displays the LSA information on summary-list.
IP: 1.1.1.2
None.
None.
Privileged EXEC Mode.
Level: 15. (EI Mode Only Command)
Use this command to turn on or turn off the OSPF debug log function. When some
important OSPF events happen, some system log entries will be added.
This example shows how to turn on the OSPF debug log function.
416