D-Link DXS-3600-16S Manual page 325

Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#interface tenGigabitEthernet 1/0/1
DXS-3600-32S(config-if)#lldp dot1-tlv-select port-vlan-id
DXS-3600-32S(config-if)#
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#interface tenGigabitEthernet 1/0/1
DXS-3600-32S(config-if)#no lldp dot1-tlv-select port-vlan-id
DXS-3600-32S(config-if)#
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#interface tenGigabitEthernet 1/0/1
DXS-3600-32S(config-if)#lldp dot1-tlv-select port-and-protocol-vlan-id interface 1-3
DXS-3600-32S(config-if)#
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#interface tenGigabitEthernet 1/0/1
DXS-3600-32S(config-if)#no lldp dot1-tlv-select port-and-protocol-vlan-id interface 1-3
DXS-3600-32S(config-if)#
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#interface tenGigabitEthernet 1/0/1
DXS-3600-32S(config-if)#lldp dot1-tlv-select vlan-name interface 1-3
DXS-3600-32S(config-if)#
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#interface tenGigabitEthernet 1/0/1
DXS-3600-32S(config-if)#no lldp dot1-tlv-select vlan-name interface 1-3
DXS-3600-32S(config-if)#
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#interface tenGigabitEthernet 1/0/1
DXS-3600-32S(config-if)#lldp dot1-tlv-select protocol-identify lacp
DXS-3600-32S(config-if)#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
If the optional TLVs advertisement state enabled, they will be encapsulated in
LLDPDU and sent to other devices.
The Protocol Identity TLV optional data type indicates whether the corresponding
Local System's Protocol Identity instance will be transmitted on the port. The
Protocol Identity TLV provides a way for stations to advertise protocols that are
important to the operation of the network. Such as Spanning Tree Protocol, the Link
Aggregation Control Protocol, and numerous vendor proprietary variations are
responsible for maintaining the topology and connectivity of the network. If EAPOL,
GVRP, STP (including MSTP), and LACP protocol identity is enabled on this port and
it is enabled to be advertised, then this protocol identity will be advertised.
This example shows how to enable port-vlan-id TLV advertisement.
This example shows how to disables port-vlan-id TLV advertisement.
This example shows how to enable port-and-protocol-vlan-id TLV advertisement
from VLAN 1-3.
This example shows how to disable port-and-protocol-vlan-id TLV advertisement
from VLAN 1-3.
This example shows how to enable vlan-name TLV advertisement from VLAN 1-3.
This example shows how to disable vlan-name TLV advertisement from VLAN 1-3.
This example shows how to enable LACP Protocol Identity TLV advertisement.
317