D-Link DXS-3600-16S Manual page 134

Example
DXS-3600-32S#show ip bgp aggregate
Network Address
------------------
100.0.0.0/8
200.0.0.0/10
Total Aggregate Address Number:
DXS-3600-32S#show ip bgp aggregate vrf VPN-A
Network Address
--------------------------------------------------------------------------
5.5.5.0/24
100.0.0.0/8
Total Aggregate Address Number: 2
DXS-3600-32S#
Display Parameters
Network Address
VRF-Name
Options
Total Aggregate Address
Number
7-73 show ip bgp cidr-only
This command is used to display routes with classless inter-domain routing (CIDR).
show ip bgp cidr-only [{all | rd ASN:NN | vrf VRF-NAME}]
Parameters
all
rd ASN:NN
vrf VRF-NAME
Default
Command Mode
Command Default Level
Usage Guideline
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows the output from the show ip bgp aggregate command, in
privileged mode.
Options
-------------------
-
summary-only
2
VRF-Name
VPN-A
VPN-A
Description
IP prefix with its mask length of the entry.
Specifies the VRF name of the aggregate routes.
May be 'as-set' or 'summary-only'.
The aggregate network number.
(Optional) Specifies to display routes of all VPN and VRFs.
(Optional) Specifies to display routes with the specified Route Distinguisher. The
ASN:NN can be IP address:number or AS number:number.
(Optional) Specifies the VRF name. The length of the VRF-NAME is 12 characters.
None.
Privileged Mode.
Level: 3. (EI Mode Only Command)
This command is used to display BGP routes with classless inter-domain routing
(CIDR).
Options
-
summary-only
126