D-Link DXS-3600-16S Manual page 203

Usage Guideline
Example
DXS-3600-32S#show error-reboot
Error Reboot: Disabled
DXS-3600-32S#
12-9 clear debug buffer
This command is used to clear the debug buffer.
clear debug buffer
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#clear debug buffer
DXS-3600-32S(config)#
12-10 show debug buffer
This command is used to show the information of the debug buffer.
show debug buffer [utilization]
Parameters
utilization
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show debug buffer
Debug buffer is empty.
DXS-3600-32S#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This command is used to show the state of the error-reboot option.
This example shows how to show the state of the error-reboot option.
None.
None.
Global Configuration Mode.
Level: 15
This command is used to clear the debug buffer.
This example shows how to clear the debug buffer.
Specifies to show the utilization of the debug buffer.
None.
EXEC Mode.
Level: 15
This command is used to show the information of the debug buffer. If no paramter is
specified, all debug information in the buffer will be displayed.
This example shows how to show the information of the debug buffer.
195