D-Link DXS-3600-16S Manual page 315

Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show lacp summary
Flags:S - Port is perform slow timeout
A - Port is in active mode.
System priority: 4096
Aggregate port 3:
Working mode: Dynamic
Local information:
Port Flags State
---------------------------------------------------------------
1 SA bndl
2 SA bndl
3 SA bndl
4 SA sups
5 FP down
Partner information:
LACP port
Port Flags Priority
-------------------------------------------------------------------------
1 SA 61440
2 SA 61440
3 SA 61440
4 SA 61440
5 FP 0
DXS-3600-32S#
Display Parameters
System priority
Working mode
Local information
Port
Flags
State
LACP Port Priority
Oper Key
Port Number
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
None.
EXEC Mode.
Level: 15
None.
This example shows how to display LACP summary.
P - Port is in passive mode
LACP port
Priority
4096
4096
4096
4096
0
Dev ID
00-d0-f8-00-00-02
00-d0-f8-00-00-02
00-d0-f8-00-00-02
00-d0-f8-00-00-02
00-00-00-00-00-00
Description
Show the LACP system priority
Show the aggregator port working mode:
Static: Manual Trunk
Dynamic: LACP
Show the local LACP information.
Show the system port ID.
Show the port state flag:
S indicates that the LACP port is working in the slow timeout mode.
A indicates that the port is in the active mode.
Show the port aggregation information:
bndl - indicates that the port is aggregated;
down - represents the disconnection port state;
sups - indicates that the port is not aggregated.
Show the LACP port priority.
Runtime operational key that is being used by this port. LACP automatically
generates this value as a hexadecimal number.
Show the port number.
F - Port is perform fast timeout.
Oper Port Port
Key Number State
0x3 0x1 0x3f
0x3 0x2 0x3f
0x3 0x3 0x3f
0x3 0x4 0x37
0x0 0x0 0x0
Oper Port Port
Key Number State
0x3 0x1 0x3f
0x3 0x2 0x3f
0x3 0x3 0x3f
0x1 0x4 0x37
0x0 0x0 0x0
307
System
Priority
32768
32768
32768
32768
0x0