Network Connectivity Test Commands - D-Link DXS-3600-16S Manual

Network Connectivity Test Commands

39-1 ping
This command is used to test the connectivity of a network.
ping [vrf <string 1-12>] {[ip] ip-address | host-name} [ntimes times] [timeout seconds] [source source]
Parameters
vrf <string 1-12>
ip-address
host-name
times
seconds
source
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#ping ip 192.168.69.66
Reply from 192.168.69.66, time<10ms
Reply from 192.168.69.66, time<10ms
Reply from 192.168.69.66, time<10ms
Reply from 192.168.69.66, time<10ms
Ping Statistics for 192.168.69.66
Packets: Sent =4, Received =4, Lost =0
DXS-3600-32S#
39-2 traceroute
This command is used to trace the routed path between the switch and a destination end station.
traceroute [vrf <string 1-12>] {[ip] ip-address | host-name} [probe number] [timeout seconds] [ttl maximum]
Parameters
vrf <string 1-12>
ip-address
host-name
number
seconds
maximum
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Specifies the VRF name for the ping test. If the VRF is not specified, it works in the
global routing forward space. Currently, the VRF doesn't influence the IPv6.
Specifies the destination IPv4 address.
Specifies the destination's host name.
Specifies the number of packets to be sent.
Specifies the time out value.
Specifies the source IPv4 address.
By default the times is infinity, the timeout is 1 second.
Privileged Mode.
Level: 1
This command tests the connectivity of a network.
This example shows how to tests the connectivity of a network.
Specifies the VRF name for the trace route test. If the VRF is not specified, it works
in the global routing forward space. Currently, the VRF doesn't influence the IPv6.
Specifies the IPv4 address of the destination end station.
Specifies the host name of the destination end station.
Specifies the number of probe packets for each TTL.
Specifies the timeout period while waiting for a response from the remote device.
Specifies the maximum number of routers that a trace route packet can cross, while
seeking the network path between two devices.
377