File System Commands - D-Link DXS-3600-16S Manual

File System Commands

20-1 dir
This command is used to show the files in the current directory.
dir directory
Parameters
directory
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#dir
Directory of flash:
1 -rw- 107389 2000/02/11 21:53:18 config.cfg
2 -rw- 107455 2000/02/12 01:53:01 y
3 -rw- 5081096 2000/02/12 01:54:02 runtime.had
4 d--- 0 2000/02/13 00:04:13 system
126002 KB total (120731 KB free)
DXS-3600-32S#
20-2 ls
This command is used to show the files in the current directory.
ls directory
Parameters
directory
Default
Command Mode
Command Default Level
Usage Guideline
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
(Optional) Specifies the path of the directory to show, defaulted to the contents in the
current directory.
By default, only the information under the current path is shown.
Privileged EXEC Mode.
Level: 2
Enter the specified directory to show the information of all the files in that directory. If
no parameter is specified, the information of the files in the current directory is shown
by default.
This example shows how to show the information of all files in the current directory.
(Optional) Specifies the path of the directory to show, defaulted to the contents in the
current directory.
By default, only the information under the current path is shown.
Privileged EXEC Mode.
Level: 2
Enter the specified directory to show the information of all the files in that directory. If
no parameter is specified, the information of the files in the current directory is shown
by default.
237