D-Link DXS-3600-16S Manual page 368

ftn
ilm
detail
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show mpls forwarding-table
LSP FEC
---- -------------
1 201.1.1.0/24
2 201.2.1.0/24
3 172.1.1.1/32
4 192.1.1.0/24
5 VC11/192.1.1.1 -
6 VC11/192.1.1.1 200
Total Entries: 6
DXS-3600-32S#
Example
DXS-3600-32S#show mpls forwarding-table detail
LSP: 1
Type: Transit
FEC: 201.1.1.0/24
In Label:20
Next Hop: 172.18.1.1
LSP: 2
Type: Transit
FEC: 201.2.1.0/24
In Label: 60
Next Hop: 192.1.1.2
LSP: 3
Type: Egress
FEC: 172.1.1.1/32
In Label: 50
Next Hop: 172.18.1.1
LSP: 4
Type: Ingress
FEC: 192.1.1.0/24
In Label: -
Next Hop: 172.18.1.1
LSP: 5
Type: Ingress
FEC: VC11/192.1.1.1
In Label: -
Next Hop: 172.18.1.1
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Specifies to only display FTN entries.
Specifies to only display ILM entries.
Specifies to display detailed MPLS label forwarding path information.
None.
EXEC Mode.
Level: 3.
This command is used to display the MPLS label forwarding path information.
This example shows how to display all MPLS label forwarding path information.
In Label Out Label
-------- ---------
20 30
60 40
50 -
- 70
100/70
-
This example shows how to display detailed MPLS label forwarding path information.
Status: Up
Owner: Static
Out Label: Swap 30
Out Interface: VLAN 10
Status: Up
Owner: LDP
Out Label: Swap 40
Out Interface: VLAN 20
Status: Up
Owner: LDP
Out Label: Pop
Out Interface: VLAN 10
Status: Up
Owner: LDP
Out Label: Push 70
Out Interface: VLAN 10
Status: Up
Owner: LDP
Out Label: Push 100/70
Out Interface: VLAN 10
Out Interface Next Hop
------------- ---------------
VLAN 10 172.18.1.1
VLAN 20 192.1.1.2
VLAN 10 172.18.1.1
VLAN 10 172.18.1.1
VLAN 10 172.18.1.1
- -
360