D-Link DXS-3600-16S Manual page 253

Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#mac-address-table static 00:00:22:0A:12:F4 vlan 4 interface
tenGigabitEthernet 1/0/1
DXS-3600-32S(config)#
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#mac-address-table static 01:00:22:0A:12:F4 vlan 4 interface
tenGigabitEthernet 1/0/2
DXS-3600-32S(config)#mac-address-table static 01:00:22:0A:12:F4 vlan 4 interface
tenGigabitEthernet 1/0/3
DXS-3600-32S(config)#
21-4 mac-address-table filtering
This command is used to add a filtering address to the MAC address table. Use the no form of the command to remove
a filtering MAC address entry from the table.
mac-address-table filtering MAC-ADD vlan VLAN-ID
no mac-address-table filtering MAC-ADD vlan VLAN-ID
Parameters
MAC-ADDR
vlan VLAN-ID
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
None.
Global Configuration Mode.
Level: 12
An error message "The specified interface does not exist." will appear if the specified
interface does not exist.
An error message "The specified VLAN does not exist." will be displayed if the
specified VLAN does not exist.
For a unicast MAC address entry, only one interface can be specified. For a
multicast MAC address entry, multiple interfaces can be specified.
To delete a unicast MAC address entry, there is no need to specify the interface ID.
To delete a multicast MAC address entry, if an interface-ID is specified, only this
interface will be removed. Otherwise, the entire multicast MAC entry will be
removed.
An error message "The specified entry does not exist." will be displayed if the user
tries to remove an entry that does not exist.
This example shows how to add the static address 00:00:22:0A:12:F4 to the MAC
address table. The user also specifies that when any packet received on VLAN 4
that has a destination MAC address of "00:00:22:0A:12:F4" will be forwarded to
tenGigabitEthernet 1/0/1.
This example shows how to add the static address 01:00:22:0A:12:F4 to the MAC
address table. The user also specifies that when any packet received on VLAN 2
that has a destination MAC address of "01:00:22:0A:12:F4" will be forwarded to
Ethernet interface 2 and 3.
Specifies the unicast source or destination MAC address to add to the address table.
Packets which source or destination address is the address received by the
specified VLAN will be dropped. The acceptable formats are 00-01-80-40-30-20,
00:01:80:40:30:20, 000180403020, and 0001.8040.3020.
Specifies the VLAN that the packet with the specified MAC address will be received
by. The range is 1 to 4094.
245