D-Link DXS-3600-16S Manual page 492

Usage Guideline
Example
DXS-3600-32S#show mls qos scheduler interface tenGigabitEthernet 1/0/1
Interface: TGi1/0/1
Multi-Layer Switching scheduling:
Strict Priority
DXS-3600-32S#
48-23 show policy-map
This command is used to display quality of service (QoS) policy maps, which defines the classification criteria for
incoming or outgoing traffic.
show policy-map [policy-map-name [class class-map-name]]
Parameters
class-map-name
policy-map-name
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show policy-map
Policy Map policy
Class class1
set dscp 22
Class class2
set dscp 14
set cos 2
police sr-tcm 8000 bc 8 be 9
conform-action: transmit
exceed-action: set-1p-transmit 3
violate-action: drop
Policy Map policy1
Class class3
set dscp 36
DXS-3600-32S#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Use this command to display the information for the queue scheduling algorithm.
The show mls qos queueing command can also be used to display its weight
value.
This example shows how to display the information for queue scheduling.
Specifies the name of the class for the class map. The name can be a maximum of
32 alphanumeric characters.
Specifies the name of a policy map that contains the class configuration to be
displayed. The name can be a maximum of 32 alphanumeric characters.
None.
Privileged EXEC Mode.
Level: 15
If no policy map name is specified, all policy map information will be display.
If the class map name is not specified, all class maps attached to the policy map's
information will be displayed.
This example shows the output from the show policy-map command.
484