Rmon Event; Show Rmon Statistics - D-Link DXS-3600-16S Manual

Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#no rmon alarm 100
DXS-3600-32S(config)#

51-4 rmon event

This command is used to add an event entry. Use the no form of this command to remove an event entry.
rmon event number [log] [trap community] [description description-string]
no rmon event number
Parameters
number
log
trap
community
description description-
string
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#rmon event 100 log trap public description test
DXS-3600-32S(config)#
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#no rmon event 100
DXS-3600-32S(config)#

51-5 show rmon statistics

This command is used to monitor basic statistics information.
show rmon statistics
Parameters
Default
Command Mode
Command Default Level
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows how to remove an alarm entry.
Specifies the event index in the range of 1 to 65535.
Specifies to record the event.
Specifies to send the trap message to the NMS when the event is triggered.
Specifies the community string used for sending the SNMP trap message.
Specifies the description of the event.
None.
Global Configuration Mode.
Level: 12
Add the RMON event information on the switch.
This example shows how to add an event entry.
This example shows how to remove an event entry.
None.
None.
Privileged EXEC Mode.
Level: 3
504