D-Link DXS-3600-16S Manual page 205

Example
DXS-3600-32S#show tech-support
#-------------------------------------------------------------------------------
#
#
#
#
# Copyright(C) 2012
#-------------------------------------------------------------------------------
********************
[SYS 2000-2-12 01:30:40]
Boot Time
RTC Time
Boot PROM Version
Firmware Version
Hardware Version
Serial number
MAC Address
MAC Address Number
********************
********************
********************
12-13 copy tech-support
This command is used to copy technical support information to a location filename through TFTP.
copy tech-support tftp //location/filename
Parameters
tftp
location
filename
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#copy tech-support tftp //10.0.0.90/tech_info.txt
DXS-3600-32S(config)#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows how to show the technical support information of IP multicast.
DXS-3600-32S TenGigabit Ethernet Switch
Technical Support Information
Firmware: Build 1.10.023
D-Link Corporation. All rights reserved.
Basic System Information
: 11 Feb 2000 23:54:52
: 2000/02/12 01:30:40
: Build 1.10.007
: Build 1.10.023
:
: D1234567890
: 00-01-02-03-04-00
: 65535
System Log ********************
Running Configuration
Layer One Information
<The Output is Truncated>
Specifies to upload the technical support information through a TFTP server.
Specifies the location of the TFTP server.
Specifies the location filename of the upload technical support information.
None.
Global Configuration Mode.
Level: 15
The user can use the copy tech-support command to copy the technical support
information through TFTP to a location file.
This example shows how to copy technical support information through TFTP to a
file named 'tech-info.txt' at 10.0.0.90
********************
********************
********************
197