D-Link DXS-3600-16S Manual page 354

out-label LABEL-VALUE
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)# mpls static l2vc-ftn 2 10.1.1.1 out-label 100
DXS-3600-32S(config)#
38-6 mpls static ilm
This command is used to add a static ILM entry. Use no mpls static ilm command to remove the previous configured
ILM.
For IP prefix FEC:
mpls static ilm in-label LABEL-VALUE forward-action {swap-label LABEL-VALUE | pop} nexthop IP-
ADDRESS fec NETWORK-PREFIX/PREFIX-LENGTH
For VC FEC:
mpls static ilm in-label LABEL-VALUE forward-action pop-l2vc-destport INTERFACE-ID fec VC-ID IP-
ADDRESS
no mpls static ilm {in-label LABEL-VALUE | all}
Parameters
in-label LABEL-VALUE
forward-action
swap-label LABEL-VALUE Specifies the swap-label forward behavior. It specifies the swapped outgoing label
nexthop IP-ADDRESS
fec NETWORK-PREFIX/
PREFIX-LENGTH
pop-l2vc-destport
INTERFACE-ID
fec VC-ID IP-ADDRESS
Default
Command Mode
Command Default Level
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Specifies the outgoing VC label.
No static VC FTN.
Global Configuration Mode.
Level: 3.
This command is used to create one FTN for the VC instance. Once the packets are
received from the associated AC, the VC label will be pushed according the
configured value. The tunnel label will be picked from the LSP that reaches the peer
PE.
This example shows how to configure one static VC FTN item.
Specifies the incoming label value of the ILM.
Specify the forward behavior of this ILM entry.
swap-label: Swap the top label in the label stack and forward the MPLS packets
to next-hop
pop: Pop the top label in the label stack and forward the MPLS packets to next-
hop
pop-l2vc-destport: Pop all labels and forward the packets to outgoing interface
value.
Specifies the next-hop IP address of this FEC.
Specifies the IP prefix FEC that is associated with the ILM.
Specifies to pop all labels and forward the packets to the specified outgoing
interface. The interface can be an Ethernet port or a VLAN interface.
Specifies the VC ID and peer LSR ID. The range of VC ID is 1-4294967295.
No static ILM.
Global Configuration Mode.
Level: 3.
346