D-Link DXS-3600-16S Manual page 248

20-7 rmdir
This command is used to delete an empty directory.
rmdir directory
Parameters
directory
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#rmdir tmp
Removed dir tmp
DXS-3600-32S#
20-8 rm
This command is used to delete the specified file.
rm filename
Parameters
filename
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#rm tmp.txt
DXS-3600-32S#
20-9 del
This command is used to delete the specified file.
del filename
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Specifies the name of directory to be deleted, which must be empty.
None.
Privileged EXEC Mode.
Level: 3
The directory to be deleted must be empty. Since this command supports
abbreviations, you can also use the rm command to delete empty directories
This example shows how to delete the tmp directory in current directory and the
directory does not contain any files.
Specifies the name of file to be deleted (including the path).
None.
Privileged EXEC Mode.
Level: 3
This command does not support the wildcard and the deletion across file systems
and across partitions. In additions, if a hard connection or symbol connection is
deleted, the contents of the file are not affected. If the file is boot up image or backup
image the operation of this command will be fail.
This command is the same as the del command.
This example shows how to delete the tmp.txt file.
240