D-Link DXS-3600-16S Manual page 193

Example
DXS-3600-32S#copy tftp: //10.0.0.66/config.cfg bootup-config
Address of remote host [10.0.0.66]?
Source filename [config.cfg]?
Destination filename bootup-config? [y/n]:
Accessing tftp://10.0.0.66/config.cfg...
Transmission start...
Transmission finished, file length 45421 bytes.
Please wait, programming flash.............. Done.
DXS-3600-32S#
Example
DXS-3600-32S#copy tftp: running-config
Address of remote host []? 10.0.0.66
Source filename []? config.cfg
Destination filename running-config? [y/n]:
Accessing tftp://10.0.0.66/config.cfg...
Transmission start...
Transmission finished, file length 45421 bytes.
Executing script file config.cfg ......
Executing done
DXS-3600-32S#
Example
DXS-3600-32S#copy ftp: //user:123@10.0.0.66:80/config.cfg bootup-config
Address of remote host [10.0.0.66]?
Source username [user]?
Source password [123]?
TCP port number of remote host [80]?
Source filename [config.cfg]?
Destination filename bootup-config? [y/n]:
Accessing ftp://10.0.0.66/config.cfg...
Transmission start...
Transmission finished, file length 45421 bytes.
Please wait, programming flash.............. Done.
DXS-3600-32S#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows how to download the 'config.cfg' file from the TFTP server then
save it and configure it to be the boot-up configuration file.
This example shows how to download the 'config.cfg' file from the TFTP server then
execute it immediately by using the increment method.
This example shows how to download the 'config.cfg' file from the FTP server then
save it and configure it to be the boot-up configuration file.
y
y
y
185