D-Link DXS-3600-16S Manual page 90

Example
DXS-3600-32S#clear ip bgp dampening 192.168.10.0/24
DXS-3600-32S#
7-26 clear ip bgp dampening vrf
This command is used to clear BGP route dampening information of VRF instance and to restore suppressed routes.
clear ip bgp dampening vrf VRF-NAME [{NETWORK-ADDRESS | IP-ADDRESS}]
Parameters
vrf VRF-NAME
NETWORK-ADDRESS
IP-ADDRESS
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S# clear ip bgp dampening vrf VPN-A 192.168.10.0/24
DXS-3600-32S#
7-27 clear ip bgp external
This command is used to reset external Border Gateway Protocol (eBGP) peering sessions using the hard or soft
reconfiguration.
clear ip bgp external [soft [{in [prefix-filter] | out}]]
Parameters
in
prefix-filter
out
soft
Default
Command Mode
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows how to clear the route dampening information of 192.168.10.0/
24 and restores suppressed routes.
(Optional) Specifies a VRF name. The length of VRF-NAME is 12 characters.
(Optional) Specifies to only clear dampening information of the route matching the
network address.
(Optional) Specifies to only clear dampening information of the route matching the IP
address.
None.
Privileged Mode.
Level: 8. (EI Mode Only Command)
This command is used to clear stored route dampening information for the specified
VRF. If no keyword is specified, the dampening information of all routes in the VRF
instance will be cleared.
The following example clears route dampening information of 192.168.10.0/24 and
restores suppressed routes in VRF VPN-A.
(Optional) Specifies to initiate an inbound reconfiguration. If neither the in nor the out
keywords are specified, both inbound and outbound sessions will reset.
(Optional) Specifies to clear the existing outbound route filter (ORF) prefix list to
trigger a new route refresh or soft reconfiguration, which updates the ORF prefix list.
(Optional) Specifies to initiate an inbound or outbound reconfiguration. If neither the
in nor the out keywords are specified, both inbound and outbound sessions will
reset.
(Optional) Specifies to initiate a soft reset. Does not tear down the session.
None.
Privileged Mode.
82