D-Link DXS-3600-16S Manual page 249

Parameters
filename
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#del tmp.txt
DXS-3600-32S#
20-10 makefs
This command is used to format the device that the file system is to be loaded or the device that is to be managed by
the file system.
makefs dev devname fs fsname
makefs fs fsname dev devname
Parameters
devname
fsname
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#makefs dev sd0: fs fat
DXS-3600-32S#
20-11 pwd
This command is used to show the working path.
pwd
Parameters
Default
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Specifies the name of file to be deleted (including the path).
None.
Privileged EXEC Mode.
Level: 3
This command does not support the wildcard and the deletion across file systems
and across partitions. In additions, if a hard connection or symbol connection is
deleted, the contents of the file are not affected. If the file is boot up image or backup
image, the operation will be fail.
This example shows how to delete the tmp.txt file.
Specifies the name of the device to be formatted (including the path).
Specifies the name of the file system to be used on the device.
None.
Privileged EXEC Mode.
Level: 3
This command is usually used in the following two cases:
A. The device has never used in this file system. In order to normally use the file
system on the device, you need to format the device the first time you use it.
B. After system has been used for a period of time, if you want to delete all the
files on the device, you can use this command to clear all data on the device.
The FAT is the file system to be used, and the sd0 is the device to be managed by
the file system.
None.
None.
241