D-Link DXS-3600-16S Manual page 428

Example
DXS-3600-32S#show device-status
Temperature Log State
Current Temperature(Celsius) : 20
Power 1
Power 2
FAN 1
FAN 2
FAN 3
DXS-3600-32S#
42-3 logging-server enable device
This command is used to enable the sending of log packets about peripheral devices. Use the no command to disable
the sending of log packets.
logging-server enable device
no logging-server enable device
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#logging-server enable device
DXS-3600-32S(config)#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows the device status.
: Enabled
: Active
: Fail
: Speed Middle (10598 RPM)
: Speed Middle (10485 RPM)
: Speed Middle (10743 RPM)
None.
None.
Global Configuration Mode.
Level: 12
Use the command to enable the sending of log packets about peripheral devices.
Use the no command to disable the sending of log packets.
This example shows how to enable the sending of log packets about Peripheral
devices.
420