D-Link DXS-3600-16S Manual page 226

14-22 show ip dhcp pool
This command is used to display information about the Dynamic Host Configuration Protocol (DHCP) address pools.
show ip dhcp pool [pool-name]
Parameters
pool-name
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show ip dhcp pool engineering
Pool Name
VRF Name
Network Address
Domain Name
DNS Server
NetBIOS Name Server
NetBIOS Node Type
Default Router
Pool Lease
Boot File
Next Server
DXS-3600-32S#
Display Parameters
Pool Name
VRF Name
Network Address
Domain Name
DNS Server
NetBIOS Name Server
NetBIOS Node Type
Default Router
Pool Lease
Boot File
Next Server
14-23 show ip dhcp server
This command is used to display the status of the DHCP server.
show ip dhcp server
Parameters
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Specifies a string of characters and positive integers, for instance, mypool or 1.
None.
Privileged Mode.
Level: 2
This command can display the information of the DHCP pool.
This example shows how to display the pool called engineering:
: engineering
: vrf1
: 10.10.10.0/24
: domain.com
: 10.10.10.1
: 10.10.10.1
: broadcast
: 10.10.10.1
: 10 days, 0 hours, 0 minutes
: boot.cfg
: 10.10.10.2
Description
The name of the pool.
The VRF name to which the pool is associated.
The network address configured by command network.
The suffix domain name string of the DHCP client.
DNS server of the DHCP client
NetBIOS Windows Internet Naming Service (WINS) name servers that are available
to Microsoft Dynamic Host Configuration Protocol (DHCP) clients,
Node type of the master NetBIOS of the Microsoft DHCP client.
Default router list for a Dynamic Host Configuration Protocol (DHCP) client.
The lease time of the IP address that the DHCP server assigns to the client.
The startup mapping file name of the DHCP client.
The startup server that the DHCP client accesses during startup.
None.
218