D-Link DXS-3600-16S Manual page 6

Interface Configuration Mode
Interface configuration mode is used to configure the parameters for an interface or a range of interfaces. An interface
can be a physical port, VLAN, or other virtual interface. Thus, interface configuration mode is distinguished further
according to the type of interface. The command prompt for each type of interface is slightly different.
VLAN Interface Configuration Mode
VLAN interface configuration mode is one of the available interface modes and is used to configure the parameters of
a VLAN interface.
To access VLAN interface configuration mode, use the following command in global configuration mode:
DXS-3600-32S(config)#interface vlan 1
DXS-3600-32S(config-if)#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
vi