D-Link DXS-3600-16S Manual page 342

Example
DXS-3600-32S#show lldp-med
LLDP-MED System Information:
Device Class
Hardware Revision
Firmware Revision
Software Revision
Serial Number
Manufacturer Name
Model Name
Asset ID
LLDP-MED Configuration:
Fast Start Repeat Count
LLDP-MED Log State:Disabled
DXS-3600-32S#
34-5 show lldp-med interface
This command is used to display the LLDP-MED per port configuration for advertisement options.
show lldp-med interface interface-id [, | -]
Parameters
interface interface-id
,
-
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show lldp-med interface tenGigabitEthernet 1/0/1
Interface ID
-----------------------------------------------------------------
Topology Change Notification Status
LLDP-MED Capabilities TLV
LLDP-MED Inventory TLV
DXS-3600-32S#
34-6 show lldp-med local
This command is used to display the each physical interface information currently available for populating outbound
LLDP-MED advertisements.
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows how to display the LLDP-MED system global configuration
status.
: Network Connectivity Device
:
: 1.10.007
: 1.10.023
: D1234567890
: D-Link
: DXS-3600-32S TenGigabit Ethernet
:
: 10
Specifies the valid physical interface.
(Optional) Specifies a series of physical interfaces. No space before and after the
comma.
(Optional) Specifies a range of physical interfaces. No space before and after the
hyphen.
None.
User EXEC Mode.
Level: 3
This command displays the LLDP-MED each interface configuration for
advertisement options.
This example shows how to display a specific physical interface configuration.
: 1/0/1
:Enabled
:Enabled
:Enabled
334