D-Link DXS-3600-16S Manual page 162

Display Parameters
Incoming Update Prefix List
Outgoing Update Prefix List
Incoming Update Filter List
Outgoing Update Filter List
Route Map for Incoming
Routes
Route Map for Outgoing
Routes
Outbound Route Filter (ORF)
type (64) Prefix list
Send Mode
Receive Mode
Password
Prefix Max Count
Prefix Warning Threshold
Prefix Warning Only
Total peer-group number
7-89 show ip bgp quote-regexp
This command is used to display routes which matching the regular expression.
show ip bgp quote-regexp [{all | rd ASN:NN | vrf VRF-NAME}] REGEXP
Parameters
all
rd ASN:NN
vrf VRF-NAME
REGEXP
Default
Command Mode
Command Default Level
Usage Guideline
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
Description
Indicates an IP prefix list name which the route updates received from the members
of this peer group must be applied.
Indicates an IP prefix list name which the route updates sent to the members of this
peer group must be applied.
Indicates an AS path access list name which the route updates received from the
members of this peer group must be applied.
Indicates an AS path access list name which the route updates sent to the members
of this peer group must be applied.
Indicates a route map name which the route updates received from the members of
this peer group must be applied.
Indicates a route map name which the route updates sent to the members of this
peer group must be applied.
Indicates the state of the ORF prefix list.
Indicates whether the local BGP send ORF prefix list to the members of this peer
group.
Indicates whether the local BGP receive ORF prefix list from the members of this
peer group.
Show the password set on the TCP connection to the members of this peer group.
Show the maximum number of prefixes the local BGP can accept.
Indicates in which percentage of the maximum prefixes the local BGP begin to log
warning message.
Indicates whether the local BGP terminate the session of the members of this peer
group after the total BGP routes reach the maximum prefixes.
Indicates the total number of peer groups in the local BGP router.
(Optional) Specifies to display routes of all VPN and VRFs.
(Optional) Specifies to display routes with the specified Route Distinguisher. The
ASN:NN can be IP address:number or AS number:number.
(Optional) Specifies the VRF name. The length of the VRF-NAME is 12 characters.
Displays routes matching the AS path regular expression. The maximum length is 80
characters.
None.
Privileged Mode.
Level: 3. (EI Mode Only Command)
This command displays the routes which matching the AS path regular expression.
154