D-Link DXS-3600-16S Manual page 166

Example
DXS-3600-32S#show ip community-list
Community List Name:
-----------------------------------
Type : Standard
permit : 20:30 no-advertise local-as
deny : no-export
Total Filter Entries: 2
Community List Name:
-----------------------------------
Type : Expanded
permit : .*300.*$
deny : 500
Total Filter Entries: 2
Community List Name:
-----------------------------------
Type : Expanded
permit : 20:30
Total Filter Entries: 1
Total Community-List Count:3
DXS-3600-32S#
Display Parameters
Community List Name
Type
Standard
Expanded
permit
deny
Total Filter Entries
Total Community-List Count
7-92 show ip extcommunity-list
This command is used to display extened community lists configurations.
show ip extcommunity-list [EXTCOMMUNITY-LIST-NAME]
Parameters
EXTCOMMUNITY-LIST-
NAME
Default
Command Mode
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows that the output is similar to the output that will be displayed
when the show ip community-list command is entered in the config mode.
c1
c2
c3
Description
Name of this community list.
Type of this community list.
Indicates that this entry is an standard community list with the well-known community
value internet local-AS no-advertise and no-export, or with the standard AA:NN
format.
Indicates that this entry is an expanded community list with a regular expression.
Routes with community attributes match the entry will be accepted.
Routes with community attributes match the entry will be rejected.
Total number of entries of a specifically community list.
Total numbers of the community list.
(Optional) Specifies to only display one extended community list.
None.
Privileged Mode.
158