D-Link DXS-3600-16S Manual page 156

Example
DXS-3600-32S#show ip bgp redistribute vrf VPN-A
Route Redistribution Settings
Source Destination
Protocol Protocol
-------- ------------
Redistribute For VRF VPN-A
LOCAL BGP
Total Entries : 1
DXS-3600-32S#
Display Parameters
Route Redistribution
Settings
Source Protocol
Destination Protocol
Type
Metric
RouteMapName
Total Entries
vrf
7-85 show ip bgp reflection
This command is used to display the route reflection configuration of BGP.
show ip bgp reflection
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows how to display the redistribution configuration of BGP of the IP
VRF address family:
Type Metric
-------- ------
All 0
Description
Information of redistribute between bgp and some other protocols.
The source protocol of the redistribute operation.
The destination protocol of the redistribute operation. Of course, it always is BGP.
Specify which part of route to be redistributed to bgp.
Specify the BGP metric value for the redistributed routes.
Specifies a route map which will be used as the criteria to determine whether to
redistribute specific routes.
The numbers of protocols which have do redistribute operation between bgp and the
protocol itself.
Indicates the name of the VRF if the redistribute has been done within a VRF.
None.
None.
Privileged Mode.
Level: 3. (EI Mode Only Command)
Use this command to display what you have already configured to the local BGP
about the route reflection.
RouteMapName
------------
N/A
148