D-Link DXS-3600-16S Manual page 546

Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#ip ssh server enable
DXS-3600-32S(config)#
9 2011-12-23 07:22:12 INFO(6) SSH server is enabled
DXS-3600-32S(config)#
54-5 show ip ssh server
This command is used to show the version and configuration information of the SSH server.
show ip ssh server
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show ip ssh server
Version
State
Server port number
Connection timeout
Authentication retries
DXS-3600-32S#
54-6 show ip ssh sessions
This command is used to show the status of SSH server connections on the switch.
show ip ssh sessions
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show ip ssh sessions
Index Version Username
---- ------- ------------------- ---------------
1 2.0 abc
2 2.0 tom
DXS-3600-32S#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows how to enable the SSH server globally on the switch.
None.
None.
Privileged EXEC Mode.
Level: 8
This command is used to show the version and configuration information of the SSH
server.
This example shows the SSH version and configuration information.
: 2.0
: Enabled
: 2244
: 240 secs
: 5 times
None.
None.
Privileged EXEC Mode.
Level: 8
This command is used to show the status of SSH server connections on the switch.
This example shows the status of SSH server connections on the switch.
IP
172.180.161.242
172.180.161.3
538