D-Link DXS-3600-16S Manual page 404

Example
DXS-3600-32S#configure terminal
DXS-3600-32S(config)#router ospf
DXS-3600-32S(config-router)#no router-id
DXS-3600-32S(config-router)#
40-24 show ip ospf
This command is used to Use this command to show general information about OSPF.
show ip ospf [vrf vrf-name]
Parameters
vrf vrf-name
Default
Command Mode
Command Default Level
Usage Guideline
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows how to restore the router-id to auto-select.
(Optional) Specifies to show brief information about the OSPF VRF instance.
None.
Privileged EXEC Mode.
Level: 3. (EI Mode Only Command)
Display general OSPF protocol information. It provides system-wise statistics and
per area statistics for OSPF.
396