D-Link DXS-3600-16S Manual page 12

1-4 exit
This command is used to exit any configuration mode to the next highest mode in the CLI mode hierarchy. Use the exit
command in any configuration mode. If the current mode is the highest mode (Exec Mode, Privileged Mode) in the CLI
mode hierarchy, execute the exit command to close the active terminal session by logging off the switch.
exit
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S(config-line)#exit
DXS-3600-32S(config)#exit
DXS-3600-32S#
Example
DXS-3600-32S#exit
Switch con0 is now available
Press any key to login...
16 2000-01-22 01:20:37 INFO(6) Logout through Console (Username: admin)
Copyright(C) 2012 D-Link Corporation. All rights reserved.
User Access Verification
Username:
Example
DXS-3600-32S#exit
1-5 end
This command is used to end the current configuration mode and return to the highest mode in the CLI mode hierarchy.
Use the end command in any configuration mode.
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
None.
None.
Exec Mode
Privileged Mode
All Configuration Modes
Level: 1
Use the exit command in the highest mode (Exec Mode, Privileged Mode) to exit the
active session (exit from the mode process and log off from the device). If the current
session is console, the account will logout. if there is another session running, it will
be closed.
Use the exit command in any configuration mode to the next highest mode in the CLI
mode hierarchy. For example, use the exit command in global configuration mode to
return to privileged mode.
This example shows how to exit from the Line Configuration Mode to return to the
Global Configuration Mode and exit from the Global Configuration Mode to return to
the privileged mode.
This example shows how to use the exit command, in the privileged mode, to logout
of the current account.
DXS-3600-32S TenGigabit Ethernet Switch
Command Line Interface
Firmware: Build 1.10.023
This example shows how to use the exit command, in the privileged mode, in a
Telnet session, to exit this mode and close the active session.
4