D-Link DXS-3600-16S Manual page 128

Dxs-3600 series layer 2/3 managed 10gbe switch
Hide thumbs Also See for DXS-3600-16S:
Table of Contents

Advertisement

Example
DXS-3600-32S#show ip bgp all label
BGP Local Router ID is 30.1.1.2
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal
Origin codes: i - IGP, e - EGP, ? - incomplete
Network
Route Distinguisher: 1:1 (default for VRF VPN-A)
*> 11.0.0.0/16
*> 11.0.1.0/24
*> 88.1.1.0/24
Route Distinguisher: 1:1 (VPN route(s))
*> 88.1.1.0/24
DXS-3600-32S#
Example
DXS-3600-32S#show ip bgp all 56.1.0.0/16 longer-prefixes
BGP Local Router ID is 11.11.11.11
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal
Origin codes: i - IGP, e - EGP, ? - incomplete
IP Address/Netmask
Route Distinguisher: 1:100 (default for VRF 100)
*> 56.1.0.0/16
*i
*> 56.1.1.0/24
*i
*> 56.1.2.0/24
*i
*> 56.1.3.0/24
*i
Route Distinguisher: 1:100 (VPN route(s))
*>i 56.1.0.0/16
*>i 56.1.1.0/24
*>i 56.1.2.0/24
*>i 56.1.3.0/24
Route Distinguisher: 1:106 (default for VRF 106)
*> 56.1.1.0/24
DXS-3600-32S#
Display Parameters
BGP Local Router ID
Status codes
Origin codes
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
The following example displays the BGP private labels of all routes.
From
In Label/Out Label
Self Peer
Self Peer
30.1.1.5
30.1.1.5
The following examply display route 56.1.0.0/16 and its more specific routes.
Gateway
50.1.1.10
33.33.33.33
50.1.1.10
33.33.33.33
50.1.1.10
33.33.33.33
50.1.1.10
33.33.33.33
33.33.33.33
33.33.33.33
33.33.33.33
33.33.33.33
0.0.0.0
Description
The router identifier of the local BGP router.
Status of the table entry displayed at the beginning of each line. It can be one or
more of the following values:
s—The table entry is suppressed.
d—The table entry is damped.
h—The table entry is damped and has been withdrawn by the neighbor.
*—The table entry is valid.
>—The table entry is the best entry to use for that network.
i—The table entry was learned via an internal BGP (iBGP) session.
Origin of the table entry displayed at the end of each line. It can be one of the
following values:
i—Entry originated from an Interior Gateway Protocol (IGP) and was advertised
with a network router configuration command.
e—Entry originated from an Exterior Gateway Protocol (EGP).
?—Origin of the path is not clear. Usually, this is a router that is redistributed into
BGP from an IGP.
1000/no
1000/no
no/1000
no/1000
Metric
LocPrf
0
0
100
0
0
100
0
0
100
0
0
100
0
100
0
100
0
100
0
100
0
120
Weight
Path
0
10
i
0
20
i
0
10
i
0
20
i
0
10
i
0
20
i
0
10
i
0
20
i
0
20
i
0
20
i
0
20
i
0
20
i
32768
?

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents