Show Mls Qos Maps - D-Link DXS-3600-16S Manual

Example
DXS-3600-32S#show mls qos interface tenGigabitEthernet 1/0/1
Interface: TenGigabitEthernet1/0/1
Trust Mode: trust DSCP
Default COS: 0, Effective 0
Attached input policy-map: policy1
Attached output policy-map: policy2
DXS-3600-32S#

48-19 show mls qos maps

This command is used to display the QoS map information.
show mls qos maps dscp-cos
Parameters
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show mls qos maps
DSCP COS DSCP COS
---- --- ---- ---
0 1 1 1
4 1 5 1
8 2 9 2
12 2 13 2
16 0 17 0
20 0 21 0
24 3 25 3
28 3 29 3
32 4 33 4
36 4 37 4
40 5 41 5
44 5 45 5
48 6 49 6
52 6 53 6
56 7 57 7
60 7 61 7
DXS-3600-32S#
48-20 show mls qos queueing
This command is used to display the QoS queuing information.
show mls qos queueing [INTERFACE-ID [,|-]]
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows the output from the show mls qos interface command.
None.
None.
Privileged EXEC Mode.
Level: 15
This command displays information about QoS maps.
This example shows the output from the show mls qos maps command.
DSCP COS DSCP COS
---- --- ---- ---
2 1 3
6 1 7
10 2 11
14 2 15
18 0 19
22 0 23
26 3 27
30 3 31
34 4 35
38 4 39
42 5 43
46 5 47
50 6 51
54 6 55
58 7 59
62 7 63
1
1
2
2
0
0
3
3
4
4
5
5
6
6
7
7
481