D-Link DXS-3600-16S Manual page 580

Example
DXS-3600-32S#show spanning-tree interface tenGigabitEthernet 1/0/1 link-type
PortAdminLinkType : point-to-point
PortOperP2PLinkType : point-to-point
DXS-3600-32S#
57-24 show spanning-tree mst
This command is used to display the information of MST and instances.
show spanning-tree mst {configuration | instance INTANCE-ID [interface INTERFACE-ID]}
Parameters
configuration
INTANCE-ID
interface INTERFACE-ID
Default
Command Mode
Command Default Level
Usage Guideline
Example
DXS-3600-32S#show spanning-tree mst configuration
Multi spanning tree protocol : Disabled
Name : region1
Revision Level : 2
Instance VLANS Mapped
------- -------------------------------------------------------------
CIST 1-4094
DXS-3600-32S#
Example
DXS-3600-32S#show spanning-tree mst instance 0 interface tenGigabitEthernet 1/0/1
###### MST 0 vlans mapped : 1-4094
PortState : Disabled
PortPriority : 128
PortDesignatedRoot :
PortDesignatedCost :
PortDesignatedBridge :
PortDesignatedPort :
PortAdminInternalCost :
PortOperInternalCost :
PortRole : Disabled
DXS-3600-32S#
DXS-3600 Series 10GbE Layer 2/3 Switch CLI Reference Guide
This example shows the port information about link-type.
Specifies the MST configuration of the equipment.
Specifies the instance number.
Specifies the interface number.
None.
EXEC Mode.
Level: 3
Show about MSTP information.
This example shows the MST configuration,
This example shows MSTP port information.
0000.0000.0000.0000
0
0000.0000.0000.0000
0
32
200000
572