Show Route-Map - D-Link xStack DGS-3620 Series Reference Manual

DGS-3620 m/ mSW Rls. 1.02.000

14-20 show route-map

show route-map [MAP-NAME]
Syntax Description
MAP-NAME
Default
Command Mode
Usage Guideline
Examples
Switch#show route-map maptest
route-map :
--------------------------
sequence : 10
Match clauses:
Set clauses:
Switch#
CLI Reference Guide
Use this command to show route map settings.
(Optional) Specifies the name of a route map. The maximum length is 16 characters.
None
Privileged mode
Use this command to check the settings of route map, including permit or deny
clauses and match or set commands.
To show information of route map "maptest":
maptest
(Permit)
route-source : acl1
ip next-hop : acl2
interface : System
metric : 30
route-type : external
dampening : 40 2000 2000 200 40
next-hop : 10.1.1.100
local-preference : 3000
metric-type : type-1
origin : igp
weight : 300
as-path : 20 30
show route-map
461