Cpu Protect Type; Trusted Host - D-Link DGS-1250 Series Reference Manual

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide

CPU Protect Type

This window is used to display and configure the CPU protection type settings.
To view the following window, click Security > Safeguard Engine > CPU Protect Type, as shown below:
The fields that can be configured in CPU Protect Type are described below:
Parameter
Protocol Name
Rate Limit
Click the Apply button to accept the changes made.
The fields that can be configured in Protect Type Information are described below:
Parameter
Type
Click the Find button to locate a specific entry based on the information entered.

Trusted Host

This window is used to display and configure the trusted host settings.
To view the following window, click Security > Trusted Host, as shown below:
Figure 9-60 CPU Protect Type Window
Description
Select the protocol name option here.
Enter the rate limit value used here. This value must be between 0 and 1024
packets per second. Tick the No Limit option to disable the rate limit.
Description
Select the protocol type here. After selecting the protocol type, the Rate Limit
assigned to the protocol type will be displayed.
Figure 9-61 Trusted Host Window
215