Advanced Settings; Dscp Mutation Map - D-Link DGS-1510 Series Web Ui Reference Manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide
Click the Apply button to accept the changes made.

Advanced Settings

DSCP Mutation Map

This window is used to view and configure the Differentiated Services Code Point (DSCP) mutation map
settings. When a packet is received by an interface, based on a DSCP mutation map, the incoming DSCP
can be mutated to another DSCP immediately before any QoS operations. The DSCP mutation is helpful
to integrate domains with different DSCP assignments. The DSCP-CoS map and DSCP-color map will
still be based on the packet's original DSCP. All the subsequent operations will base on the mutated
DSCP.
To view the following window, click QoS > Advanced Settings > DSCP Mutation Map, as shown below:
The fields that can be configured are described below:
Parameter
Mutation Name
Input DSCP List
Output DSCP
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.
When the Min Percent option is selected, enter the minimum
bandwidth percentage value in the space provided. This value must be
between 1 and 100 percent (%). Also enter the maximum percentage
value (Max Percent) in the space provided. This value must be
between 1 and 100 percent (%).
Figure 7-7 DSCP Mutation Map window
Description
Enter the DSCP mutation map name here. This name can be up to 32
characters long.
Enter the input DSCP list value here. This value must be between 0
and 63.
Enter the output DSCP value here. This value must be between 0 and
63.
155