Advanced Settings; Dscp Mutation Map; Port Trust State And Mutation Binding - D-Link DXS-3600 Series Reference Manual

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide

Advanced Settings

DSCP Mutation Map

This window is used to view and configure the Differentiated Services Code Point (DSCP) mutation map
settings. When a packet is received by an interface, based on a DSCP mutation map, the incoming DSCP
can be mutated to another DSCP immediately before any QoS operations. The DSCP mutation is helpful
to integrate domains with different DSCP assignments. The DSCP-CoS map and DSCP-color map will
still be based on the packet's original DSCP. All the subsequent operations will base on the mutated
DSCP.
To view the following window, click QoS > Advanced Settings > DSCP Mutation Map, as shown below:
The fields that can be configured are described below:
Parameter
Mutation Name
Input DSCP List
Output DSCP List
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.

Port Trust State and Mutation Binding

This window is used to view and configure port trust state and mutation binding settings.
To view the following window, click QoS > Advanced Settings > Port Trust State and Mutation
Binding, as shown below:
Figure 7-7 DSCP Mutation Map Window
Description
Enter the DSCP mutation map name here. This name can be up to 32
characters long.
Enter the input DSCP list value here. This value must be between 0
and 63.
Enter the output DSCP list value here. This value must be between 0
and 63.
324