Lldp; Lldp Global Settings - D-Link DXS-3600 Series Reference Manual

Layer 2/3 managed 10gigabut ethernet switch

Hide thumbs Also See for DXS-3600 Series:

Table of Contents

DXS-3600 Series Layer 3 Managed 10Gigabit Ethernet Switch Web UI Reference Guide

Click the Apply button to accept the changes made.

LLDP

This window is used to view and configure the LLDP global settings.

To view the following window, click L2 Features > LLDP > LLDP Global Settings, as shown below:

The fields that can be configured in LLDP Global Settings are described below:

LLDP Forward State

LLDP Trap State

LLDP-MED Trap State

Click the Apply button to accept the changes made.

Figure 5-72 LLDP Global Settings Window

Select this option to enable or disable the LLDP feature

Select this option to enable or disable LLDP forward state. When the

LLDP State is disabled and LLDP Forward Sate is enabled, the

received LLDPDU packet will be forwarded.

Select this option to enable or disable the LLDP trap state.

Select this option to enable or disable the LLDP-MED trap state.