Enable Snmp Authenticate Trap - D-Link DGS-3100 SERIES Cli Manual

Restrictions
Example usage:
To prevent SNMP traps from being sent from the Switch:

enable snmp authenticate trap

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To turn on SNMP authentication trap support:
disable snmp authenticate trap
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable the SNMP authentication trap support:
show snmp traps
Purpose
Only Administrator or operator-level users can issue this command.
DGS3100# disable snmp traps
Success.
DGS3100#
To enable SNMP authentication trap support.
enable snmp authenticate trap
The enable snmp authenticate trap command enables SNMP
authentication trap support on the Switch.
None.
Only Administrator or operator-level users can issue this command
DGS3100# enable snmp authenticate trap
Success.
DGS3100#
To disable SNMP authentication trap support.
disable snmp authenticate trap
The disable snmp authenticate trap command disables SNMP
authentication trap support on the Switch.
None.
Only Administrator or operator-level users can issue this command
DGS3100# disable snmp authenticate trap
Success.
DGS3100#
To display SNMP trap support status on the Switch.
DGS-3100 Series Gigabit Stackable Managed Switch CLI Manual
42