Pim Global Status - Dell PowerConnect 6224 User Manual

Register Threshold Rate — If PIM-SM is selected as the protocol, enter the minimum source data rate
•
in K bits/second above which the Rendezvous Point router switches to a source-specific shortest path
tree. The valid values are from 0 to 2000 K bits/sec. The default value is 0. This field is not available for
PIM-DM.
Configuring PIM Using CLI Commands
For information about the CLI command that performs this function, see the following chapters in the
CLI Reference Guide:
• PIM-DM Commands
• PIM-SM Commands
The following table summarizes the equivalent CLI commands for this feature.
Table 12-32. PIM Global Configuration Commands
CLI Command
ip pimdm
ip pimsm

PIM Global Status

Use the PIM Global Status page to view the administrative status of PIM-DM or PIM-SM on the
switch.
To display the page, click IPv4 Multicast → PIM → Global Status or IPv6 Multicast → PIM → Global
Status in the tree view.
Figure 12-34. PIM Global Status
The PIM Global Status page contains the following fields:
• PIM Protocol — Select PIM-DM or PIM-SM. Only one PIM protocol can be enabled on the switch at
a time. If you select PIM-SM, additional fields appear.
Description
Enables the administrative mode of PIM-DM in the router.
Enables the administrative mode of PIM-SM in the router.
Configuring IP Multicast
767