The following is an example of the CLI commands:
console> enable
Console# configure
console (config)# ip name-server 176.16.1.18
Defining Default Domains
The Default Domain Name page provides information for defining default DNS domain names.
To open the Default Domain Name page, click System IP Addressing Default Domain Name
in the tree view.
Figure 6-42. Default Domain Name
Default Domain Name (1-158 characters) — Contains a user-defined DNS domain name server.
When selected, the DNS domain name is the default domain.
Type — The domain type if the domain was statically or dynamically created.
Remove — When selected, removes a selected domain.
Defining DNS Domain Names Using the CLI Commands
The following table summarizes the CLI commands for configuring DNS domain names.
130
Configuring System Information