Creating A Custom Expression For An Authentication Server; Procedure); Creating A Custom Expression For An Authentication Server (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING INFRANET CONTROLLER GUIDE REV 01 Manual

NSM Infranet Controller Configuration Guide
Related
Documentation

Creating a Custom Expression for an Authentication Server (NSM Procedure)

118
Add or modify anonymous server settings as specified in Table 37 on page 118.
4.
Click one:
5.
OK—Saves the changes.
Cancel—Cancels the modifications.
Table 37: Anonymous Server Instance Configuration Details
Option
Auth Server Name
Auth Server Type
Configuring an Infranet Controller RSA ACE/Server Instance (NSM Procedure) on
page 119
Configuring an Infranet Controller Active Directory or NT Domain Server Instance (NSM
Procedure) on page 121
Creating an Authentication Realm (NSM Procedure) on page 87
Custom expressions are strings that are made up of variables, operators, and
subexpressions all concatenated together. These operators and variables are provided
through an expressions dictionary.
To create a custom expression for an authentication server:
In the NSM navigation tree, select Device Manager > Devices.
1.
Click the Device Tree tab, and then double-click the Infranet Controller for which you
2.
want to configure a server catalog.
Click the Configuration tab. In the configuration tree, select Authentication > Auth
3.
Servers.
Add or modify an auth server instance and then select Server Catalog. The Expressions
4.
tab appears.
Click New (+) to create a custom expression. The Custom Expression editor appears.
5.
On the left side of the editor is the Expression Dictionary, which includes the following
custom expression building blocks:
Logical Operators: This node consists of logical operators that are used to build
expressions. Select a logical operator and click the Insert Expression button to
insert logical operators in expressions.
Prebuilt Expressions: This node consists of expressions that function as templates
for custom expressions. Select a prebuilt expression and click the Insert Expression
Function
Specifies a name for the
auth server.
Specifies the auth server
type.
Your Action
Enter a name for the auth server.
Select Anonymous Server.
Copyright © 2010, Juniper Networks, Inc.