Table of Contents
Advertisement
Media Flow Manager Administrator's Guide
Figure 24
System Config > Users Page Detail (User Accounts)
Select a user account and Remove, Enable, and/or Disable it. Click Save at the top of the
page to make changes persistent across reboots.
Add New User
On the System Config > User page, add a new user to Media Flow Manager. See
•
User—Login name.
•
Full YPName—Displays in User Accounts list.
•
Capability— There are three pre-defined capabilities:
•
admin—Full privileges (default); in Enable mode all EXEC commands are available.
•
monitor—Privileges for reading all data and performing all actions, but not for
changing any configuration.
•
unpriv—Unprivileged.
Click Add User to complete operation. Click Save at the top of the page to make changes
persistent across reboots.
Figure 25
System Config > Users Page Detail (Add New User)
Change Password
For each user, admin, cmcclient, cmcrendv, and monitor are default users, set or change
the password. May be left empty if no password is required.
Click Save at the top of the page to make changes persistent across reboots.
CHAPTER 3 Media Flow Manager Web-Based Interface
Figure 25.
System Config
49
Advertisement
Table of Contents
